Rebuild and Refurbish your Labelers

Easy to do, and economical!



Why not refurbish your old labellers?

Incredibly powerful Servo Labeling System ready to go...


Many labellers out there have very adequate conveyors, wrap belts, wipers, hold down belts, but their label head is worn out. 

This is particularly true of clutch brake models, and stepper motor labelers. 

It is not just the cost of continual repairs but the considerable cost of rework and/or lost production.


This hidden cost is likely to add up easily to much more than simply replacing the label heads, and a few bearings


The Herma H400 label heads have everything built right in to the head.  No extra control box....simply mount the head and plug it in to power.


Of course we have mounting brackets, wrap belts, sensors and anything else you might need too.  We can give you an estimate to do the job for you.  Just send us pictures and we will give you a price.

So let us strip out the heads and controls.......


Or you can......

.....and replace them with a Herma head that has no External Control


All the electronics and servo controls specifically designed for a label head is integrated into the Herma housing for the powerful 400 watt servo.


Remarkably all the necessary electronic options conceived over 100 years of experience have also been integrated ready to be selected by the user.


The result is astonishing, a virtually new labeller for a fraction of the cost.
At the risk of repeating what has been said about the H400 head here it is again!
We select the label height needed

 Extension kits are available for label height required.
The standard is 160mm (6"0) with extension kits for either 240mm (9") or 320mm (12") maximum label height

Perfect for the Role!

An Exclusive Herma feature is the twist on/twist off Core and rewind holders.
Just twist a knob and the core is released to load fresh Labels. The same system for the backing paper.

Just the faster label changes will probably pay for your Head!
Simple Touch Control

In case you need to configure your applicator, the clearly laid out display
panel allows for convenient and simple adjustment to any needed operating parameters.
Optional Loose loop

The loose loop system removes all tension in the web.  It is situated between the reel of labels and the label head.  As the labels are being dispensed, the separate loose loop servo drive continually feeds fresh labels into into the loose loop box.

Optional Power Unwind


A Power Unwind is recommended when Large Label rolls are used or when heavy (tall) labels are being used.

The standard reel is 300 mm diameter (11 1/2") and the power unwind reel is 350 mm (14")

The standard reel is removed and the Power unwind is attached.

Optional Power Rewind


Likewise a Power Rewind is recommended when Large Label rolls are used or when heavy (tall) labels are being used. It is also useful at very high speeds of feed.

The Power rewind reel is 250mm (10 ") in diameter.

Right and/or Left Hand heads

Depending on the application both right hand and left hand heads are available.
It is important to pick the correct heads or your labels will have to be rewound.

The way we remember, is if you are sitting on the conveyor and travelling down it, a Right hand head will be on your right!
End Effects

The modular approach extends to the end where interchangeable choices exist to suit an application including several patented devices.
Shaped containers

A Unique pivoting air operated beak for difficult applications often saves the day.